Published February 2020, Pg. 25-29

Section: Оffshore hidrotechnical facilities

UOT: 622.24.05:620.193/.197

DOI: 10.37474/0365-8554/2020-2-25-29

Technology of steel jackets load-out in deep-water offshore platforms from the barge

F.G. Hasanov

Currently, great attention is paid to the development issue of the shelf’s fuel and energy resources foremost in the oil-gas fields of the Caspian Sea. The problem solution requires the studying of great majority of scientific-technical issues. One of the significant problems is the lead-out of steel jacket from the offshore platform as a major element of oil-gas field hydro-technical facilities meant for the operation in the deep water. The calculations for the execution of operations with steel jacket of deep stationary platform from the block with the detailed chara- cteristics by the mass and gravity center coordinates alongside line data have been carried out with “SACS” and “STAAD.PRO” software programs. The steel jacket is pushed astern with the push-pull equipment on the barge. Due to the shift of gravity centre the jacket changes the trim in the stern. Through the elevation of trim angle brought in alignment with the friction ration between the jacket and barge, the jacket slides further itself. Herewith, the trim increases until the gravity centre of steel jacket on the barge is not in alignment with rotation centre of the large rocker arms. The studies helped to fix the position of the jacket’s gravity centre from the aft perpendicular, the trim moment, the trim of the barge, the draft with the bow and stern and the trim angle as well.