Published December 2021, Pg. 38-41

Section: Oil field equipment

UOT: 622.276

DOI: 10.37474/0365-8554/2021-12-38-41

Optimization of casting process under the pressure in production of thermoplastic details used in oil field equipment

N.A. Hasanova PhD in Tech. Sc. - Azerbaijan State University of Oil and Industry

The paper reviews the optimization process during production of thermoplastic details used in the oil field equipment. The issue of studying the quality of thermoplastic details in the view of technological regimes is considered. The methods of quality improvement of the details operated in the oil field equipment are studied by regulating a great amount of variables, their optimum composition and preparation regimes justified as well.

References:

1. Kerimov D.A. Nauchnye osnovy i prakticheskie metody optimizatsii pokazateley kachestva plastmassovykh detaley neftepromyslovogo oborudovaniya: dis. dokt. tekhn. nauk. – Baku: AzINEFTEKHIM im. M. Azizbekova, 1985.

2. Braginskiy V.A. Tochnoe lit´yo izdeliy iz plastmass. – L.: Khimiya, 1977, 127 s.

3. Salukavadze M.E. Zadachi vektornoy optimizatsii v teorii upravleniya. – Tbilisi: Medniereba, 1975, 202 s.

4. Ozernoy V.M. Printsipy postroyeniya i ispol´zovaniya mnogokriterial´nykh modeley zadach prinyatiya rezhima: v kn. “Problemy prinyatiya resheniya”, 1974, vyp. 5, s. 3-15.

5. Zak Yu.R. Modeli i metody postroyeniya kompromissnykh planov i zadach matematicheskogo programmirovaniya s neskol´kimi tselevymi funktsiyami // Kibernetika, 1972, No 4, s. 102-107.

6. Gasanova N.A. Experimental study of quality of plastic details of the oil field equipment, 2021, pp. 20-23.