Published March 2025, Pg. 49-53
Section: Oil refining and petroleum chemistry
UOT: 678.4:658.567
DOI: 10.37474/0365-8554/2025-03-49-53
Comparison of thermal and catalytic cracking of fuel oil with addition of polyethylene waste and tire waste
V.M. Abbasov Dr. in Ch. Sc. - Institute of Petrochemical ProcessesThermal and catalytic cracking play a key role in modern oil refining, enabling the efficient processing of raw materials to produce fuel products with high performance characteristics. These processes are aimed at breaking down high-molecular-weight hydrocarbons to form lighter compounds suitable for use as motor fuels. One of the directions for improving these technologies is the incorporation of secondary raw materials, such as polymer waste and used tires, which contributes both to solving environmental problems and increasing the economic efficiency of processing.
The use of polyethylene and tire waste as modifying additives to fuel oil in the cracking process represents a promising research direction. The processing of polyethylene waste and tires by thermal cracking not only reduces the accumulation of these wastes but also yields valuable products such as gasoline and diesel fractions with high octane and cetane numbers. This also helps to reduce the burden on natural resources, decrease carbon-containing emissions, and promote the development of a circular economy.
In this study, the processes of thermal and catalytic cracking of fuel oil containing 10 wt. % low-density polyethylene waste (LDPE) and 5.0 wt. % used tire crumb were investigated at a temperature of 450 oC and a feed rate of 1 h-¹. The catalytic cracking process was conducted using the celite-containing catalyst Zeocar-600. The catalytic cracking of the raw material mixture increased the yield of light fractions by 5.5 wt. % while simultaneously reducing the yield of the heavy gas oil fraction by 12.7 wt. %. After the hydrotreatment process, the gasoline and diesel fractions can be used as components of commercial automotive fuels.
Thus, the application of polymer waste and used tires in the thermal and catalytic cracking of fuel oil is an effective method for resource conservation and reducing the environmental impact of the oil refining industry. The development of such technologies contributes to the creation of sustainable production chains and the formation of economically beneficial solutions within the framework of the circular economy concept. Moreover, such methods allow enterprises to comply with modern environmental standards, minimizing potential legal risks associated with waste disposal. Future research prospects include catalyst optimization, the search for new additives, and the study of the influence of various process parameters on product yield and quality.
References:
1. Varfolomeev M.A., Yuan C., Ancheyta J. Catalytic in-Situ Upgrading of Heavy and Extra-Heavy Crude Oils. John Wiley & Sons, 2023.
2. Shikui W., Kaixiong X., Lusen J., Li W. The Co-Cracking Experiment and Application Route of Waste Plastics and Heavy Oil. AASRI Conference on Power and Energy Systems. 2014, pp. 3-7.
3. Ahmaruzzaman M., Sharma D.K. Characterization of Liquid Products Obtained from Cocracking of Petroleum Vacuum Residue with Plastics. Energy and Fuels, 2006, v. 6, pp. 2498-2503.
4. Ishaka M., George M. Catalytic Copyrolysis of Heavy Oil with Polypropylene. Sustainable Chemistry and Engineering, 2022, v. 10, pp. 15824-15837.
5. Ng S.H. Conversion of Polyethylene Blended with VGO to Transportation Fuels by Catalytic Cracking. Energy Fuels, 1995, v. 9, pp. 216-224.
6. Jan M.R., Shah J., Gulab H. Catalytic Degradation of Waste High-Density Polyethylene into Fuel Products Using BaCO3 as a Catalyst. Fuel Process. Technol, 2010, v. 91 (11), pp. 1428-1437.
7. Ratnasari D.K., Nahil M.A., Williams P.T. Catalytic Pyrolysis of Waste Plastics Using Staged Catalysis for Production of Gasoline Range Hydrocarbon Oils. J. Anal Appl. Pyrolysis, 2017, v. 124, pp. 631-637.
8. Lee K.H. Effects of the Types of Zeolites on Catalytic Upgrading of Pyrolysis Wax Oil. J. Anal Appl. Pyrolysis, 2012, v. 94, pp. 209-214.
9. Lerici L.C., Renzini M.S., Pierella L.B. Chemical Catalyzed Recycling of Polymers: Catalytic Conversion of PE, PP and PS into Fuels and Chemicals over H-Y. Procedia Materials Science, 2015, v. 8, pp. 297-303.
10. Anuar S.S.D., Abnisa F., Wan Daud W.M.A., Aroua M.K. Energy Recovery from Pyrolysis of Plastic Waste: Study on Non-Recycled Plastics (NRP) Data as the Real Measure of Plastic Waste. Energy Convers Manag, 2017, v. 148, pp. 925-934.
11. Kaiser K., Schmid M., Schlummer M. Recycling of Polymer Based Multilayer Packaging: A Review. Recycling. 2018, v. 3, Page 1.
12. Kumar, S.; Singh, E.; Mishra, R.; Kumar, A.; Caucci, S. Utilization of Plastic Wastes for Sustainable Environmental Management: A Review. ChemSusChem. 2021, v. 14 (19), pp. 3985-4006.
13. Nisar J., Ali G., Ullah N., Awan I.A., Iqbal M., Shah A., Sirajuddin, Sayed M., Mahmood T., Khan M.S. Pyrolysis of waste tire rubber: Influence of temperature on pyrolysates yield. J. Environ. Chem. Eng. 2018, v. 6, pp. 3469-3473.
14. Laresgoiti M.F., Caballero B.M., de Marco I., Torres A., Cabrero M.A., Chomón M.J. Characterization of the liquid products obtained in tyre pyrolysis. J. Anal. Appl. Pyrolysis, 2004, v. 71, pp. 917-934.
15. Sengeiad S., Jitkarnka S. Untreated and HNO3-treated pyrolysis char as catalysts for pyrolysis of waste tire: In-depth analysis of tire-derived products and char characterization. J. Anal. Appl. Pyrolysis. 2016, v. 122, pp. 151-159.
