Published October 2025, Pg. 29-32

Section: Oil field equipment

UOT: 658.58-2

DOI: 10.37474/0365-8554/2025-10-29-32

Study of technology of manufacturing plastic parts of oil and mining equipment

N.A. Gasanova PhD in Tech. Sc. - Azerbaijan State University Oil and Industry

Analysis of design features of plastic parts and specific operating conditions in oil production equipment units shows that the main reason for their use is not only severe operating conditions, but also the limited scientific research in the field of plastic materials in oil engineering. In this regard, the article discusses the use of plastic materials instead of non-ferrous and ferrous metals, the most promising of which is among the many ways to increase the durability and efficiency of plastic parts used in oil field equipment. Plastic parts are not only resistant to corrosion, but also have good dynamic and static properties. The high level of these indicators makes plastic parts more efficient. In addition, their electrical resistance is the main characteristic that distinguishes them from metals. In this regard, it should be noted that these parts have proven themselves in harsh conditions and various climatic conditions. Experience shows that their manufacturing technology and operating conditions differ from metals.

References:

1. Kerimov D.A. Naucniye osnovy i prakticheskiye metody optimizasii pokazateley  kachestva plastmassovykh detaley neftepromislovogo oborudovaniya // dis. d-ra. texn. nauk, Baku, 1985, s. 302. 

2. Kerimov D.A., Qurbanova S.K. Osnovy konstruirovaniya plastmassovykh detaley i press. – Baku: Еlm, 1997, 504 s.

3. Gasanova N.A. Issledovaniye kachestva plastmassovykh detaley neftepromislovoqo oborudovaniya: monoqrafiya, Baku, 2021, s. 161.

4. Kerimov D.A. Eksperimentalnoye issledovaniye kachestva plastmassovykh detaley neftepromislovogo oborudovaniya // Mashinovedeniye. Baku, 2014, № 2, s. 33-37.

5. Gasanova N.A., Quliyev A.A., Sharifova A.V., Huseynli Z.S., Khankishiyeva T.U. Multistage investigation of the relationship between physical-mechanical and antifriction properties of polymeric materials. 16th International Conference on the “Application of Artificial Intelligence Tools, Soft Computing, and Fuzzy Systems” (ICAFS-2023),
v. 2, Springer Cham, ISSN 2367-3370, ISBN 978-3-031-72506-7, 2024.

6. Gasanova N.A. Issledovaniye kachestva plastmassovykh detaley neftepromislovogo oborudovaniya: dis. d-ra filosofii po texhnike, Baku, 2014, 128 s.

7. Kerimov D.A., Gasanova N.A. Determination of quality of plastic details without disruptions // 13th International Conference on Theory and Application of Fuzzy Systems and Soft Computing – ICAFS-2018. Warsaw, Poland, 2018,
v. 896, pp. 848-851, https://doi.org/10.1007/978-3-030-04164-9_111.