Published October 2026, Pg. 44-47

Section: Oil field equipment

UOT: 678.066

DOI: 10.37474/0365-8554/2026-10-44-47

A study to assess the quality of plastic parts in oilfield equipment

N.A. Gasanova PhD in Tech. Sc. - Azerbaijan State University Oil and Industry

The requirements for plastic parts in oilfield equipment are quite high. Each specific application requires different requirements, depending on the nature and magnitude of loads, operating conditions, and design features of the equipment. Key requirements include high mechanical strength, dimensional accuracy, wear resistance, and resistance to aggressive environments. It should also be noted that the climatic conditions of oilfield equipment operation are quite varied. Air temperatures range from –50 oC to + 50 oC. In many cases, operating conditions are complicated by storm winds, which cause dust.

References:

1. Kerimov D.A., Qurbanova S.K. Osnovy konstruirovaniya plastmassovykh detaley i press-form. – Baku: Izd-vo “Еlm”, 1997, 504 s.

2. Kerimov D.A. Eksperimentalniye issledovaniye kachestva plastmassovykh detaley neftepromislovogo oborudovaniya // Mashinovedeniye, 2014, № 2, s. 33-37.

3. Gasanova N.A. Issledovaniye kachestva plastmassovykh detaley neftepromislovogo oborudovaniya // Monografiya, 2021, s. 161.

4. Kerimov C.A. Mashinqayirma texnologiyasi. – Chashioglu, 2010, 508 s.

5. Babin A.N. Svyazushiye dlya polimernykh kompozisionnykh materialov novoqo pokoleniya // Trudi VIAM: elektron. nauch.-texnich. jurn. 2013, № 4, s. 43-45.

6. Kerimov D.A., Gasanova N.A. Development of optimal regimes of cooling for plastic parts of thermosets SAEQ Science & Applied Engineering Quarterly, Jan-Feb-Mar 2017, pp. 17-19.

7. Kerimov D.A. Nauchniye osnovy i prakticheskiye metody optimizasii kachestva izqotovleniya plastmassovikh detaley dlya neftepromislovoqo oborudovaniya neftyanoy i qazovoy promishlennosti // “Neftʹ i qazˮ, 1997, № 1-2,
77-83 c.

8. Boltakov N.V., Salakhov A.M. Upruqaya i plasticheskaya deformasiya: Uchebno-metodicheskoye posobiye /
N.V. Boltakova, A.M. Salakhov. – Kazanʹ: Kazan. un-t, 2017, 43 s.

9. Kerimov D.A. Eksprementalʹnoye issledovaniye kachestva plastmassovykh detaley neftepromislovoqo oborudovaniya // Mashinovedeniye, 2014, № 2, s. 33-37.

10. Mashkov Yu.K. Tribofizika metallov i polimerov: monoqrafiya / Y.K. Mashkov – Omsk: Izd-vo OmQTU, 2013, 240 s.