Azerbaijan Oil Industry Journal
August 2020

Section : Geology and geophysics

Carbonic nanostructures in subsurface rocks: problem review Part I. Fullerenes

M.Ya. Maharramova , I.S. Guliyev , A.B. Huseynov , E.B. Zeynalov

UOT: 551.14:550.83

DOI: 10.37474/0365-8554/2020-8-4-13

Section : Geology and geophysics

Study interrelation between deformational characteristics of rocks with longitudinal and cross-sectional wave speed based on experimental data (in the order of discussion)

R.A. Mukimov , B.Z. Kazimov

UOT: 622.276.5:550.064.45

DOI: 10.37474/0365-8554/2020-8-14-16

Section : Oil and gas field development and exploitation

The paper studies the reduction rate of gas production in the wells of Bulla-deniz field drilled to VIII horizon. With this purpose, geological (reservoir properties, oil-gas saturation, net thickness, formation pressure and temperature, formation heterogeneity, multi-layer system, tectonic faults, physical-chemical properties of oil and gas etc.) and technological (well structure, measuring and transportation system, well operation regime, drilling technology etc.) conditions of formation were analyzed and the well model of VII and VIII horizons of Bulla-deniz field using these geological and technical parameters developed as well. For the estimation of impact of geological and technical aspects on production, sensitivity analysis was carried out on the models. The suggestions for elaboration of uncertainty of geological and technical parameters affecting production dynamics were developed. To reveal the reasons for production differences of the wells, it was proposed to install borehole manometers, to obtain the data on pressure recovery curves, drainage area, skin-effect impact, permeability and to develop a study plan of bottomhole zone with acid.

E.H. Ahmadov

UOT: 622.276.4

DOI: 10.37474/0365-8554/2020-8-21-26

Section : Technique and technology of oil-gas production

Water-isolating clay-containing compositions with adjustable swelling characteristics

G.M. Panahov , E.M. Abbasov , V.D. Balakchi

UOT: 622.276.4; 622.276.6

DOI: 10.37474/0365-8554/2020-8-27-33

Section : Nanotechnologies in oil industry

Development of manufacturing technology of nanostructured ceramic choke

K.B. Rustamova , V.M. Shamilov , I.A. Habibov , E.G. Hajiyev

UOT: 622.279:620.193/.197

DOI: 10.37474/0365-8554/2020-8-34-38

Section : Oil and gas preparing and transportation

Estimation of oil loss depending on spill degree in industrial pipelines

E.Kh. Iskenderov

UOT: 553.982

DOI: 10.37474/0365-8554/2020-8-39-41

Section : Oil field equipment

Study the effect of casting temperature on details from thermo-plastic materials

J.A. Kerimov

UOT: 622.279:620.193.197

DOI: 10.37474/0365-8554/2020-8-42-45

Section : Сorrosion protection

New metal complexes with inhibiting and biocide properties

F.F. Veliyev

UOT: 622.279:620.193/.197

DOI: 10.37474/0365-8554/2020-8-46-52

Section : Oil refining and petroleum chemistry

Development and study of new lubricating compositions based on compound esters of cyclic polyatomic alcohols and industrial pentaerithritol ester

M.A. Mammadyarov , G.N. Gurbanov , K.M. Yusifova

UOT: 665.63 – 404

DOI: 10.37474/0365-8554/2020-8-53-57

Section : Economy, management and law

Estimation of professionals’ conformity for oil production cut (in the order of discussion)

F.G. Agayev , N.A. Shirinzade

UOT: 622.276

DOI: 10.37474/0365-8554/2020-8-58-61

Section : Young scientists and specialists

Innovations in nanotechnology: a method of increasing reliability and efficiency of the operation of gas compressor units

T.I. Temurov

UOT: 665.63-404

DOI: 10.37474/0365-8554/2020-8-62-68