Published April 2023, Pg. 43-47
Section: Oil refining and petroleum chemistry
UOT: 665.6/7:502.171;665.6/7:658.567
DOI: 10.37474/0365-8554/ 2023-04-43-47
The study of byproduct of ethylene production with light pyrolysis resin and properties of obtained varnish
F.M. Sadygov Dr. in Tech. Sc. - Institute for Catalysis and Inorganic ChemistryThe composition of the light pyrolysis resin has been studied with the methods of gas-chromatographic and mass-spectrometry analysis. 70.24 % of aromatic, 8.53 % of saturated and 7.83 % of non-saturated hydrocarbons have been revealed in the sample. Aromatic hydrocarbons with high content percentage of the light pyrolysis resins have been rectified. The treatment of the oil-polymer resin into the varnish in the distillation residue has been researched. It was defined that the varnishes are stable against the reactions of the acids, salts, alkali, sea water and mineral oil, and do not have electrical conductivity. Moreover, it was also revealed that a varnish obtained with an aluminum complex catalyst on toluol is of higher quality than that of obtained via thermal treatment.
References:
1. Mnushkin I.A., Egutin N.L. Razrabotka sposoba polucheniya etilena pirolizom benzinovoy fraktsii gidrokrekinga // NefteGazoKhimiya, 2016, No 4, s. 37-40.
2. Sadygov F.M., Magerramova Z.Yu., Gadzhiyev G.N., Gasan-zade G.G., Mamedova I.G., Melikova E.T. Vliyanie tekhnologicheskogo rezhima ustanovki termicheskogo piroliza uglevodorodov na kachestvenniy sostav tyazhyoloy smoly // World Science, 2019, No 1(41), s. 29-35.
3. Kodirov O.Sh., Mirzakulov Kh.Ch., Berdiyev Kh.U., Sharipova V.V. Issledovanie khimicheskogo sostava pirokondensata piroliznogo proizvodstva // Universum: Tekhnicheskie nauki, 2018, No 9, s. 59-64.
4. Kapustenko P.O., Ulyev L.M., Ilchenko M.V., Arsenyeva O.P. Integration Processes of Benzene-toluene-xylene Fractionation, Hydrogenation, Hydrodesulphurization and Hydrothermoprocessing on Installation of Benzene // Chemical Engineering Transactions, 2015, v. 45, pp. 235-240.
5. Bondaletov V.G. Kompleksnaya pererabotka zhidkikh produktov piroliznykh proizvodstv etilena i propilena: diss. na soisk. uch. step. d-ra tekhn. nauk. – Tomsk: Natsional´niy issledovatel´skiy Tomskiy politekhnicheskiy universitet, 2014, 376 s.
6. Gadetskiy A. Palladievye katalizatory na ustanovkakh piroliza dlya ochistki etilena, propilena, BTK fraktsii // Engineering and Consulting, 2016, 18 p. https://makston-engineering.ru/
7. Tsukanov M.N. Puti primeneniya vtorichnykh produktov piroliza // Universum: tekhnicheskie nauki: elektron. nauchn. zhurn., 2021, 4(85). URL:https://7universum.com/ru/tech/archive/item/11609 (data obrashcheniya: 04.07.2022).
8. Sadygov F.M., Magerramova Z.Yu.,Guseynov I.A., Gadzhiyev G.G., Dzhakhandarov Sh.D., Mamedova I.G. Poluchenie vysokochistnogo benzola pererabotkoy legkoy smoly proizvodstva EP-300 // Neft kimyasy uzre IX Baki Beynelkhalg Yusif Mammadaliyev konfransy. Baki, 2016, s. 144.
9. Ibragimov H.C., Ismailov E.H., Gasimova K.M., Yusifov Yu.H., Ibragimova Z.M., Kolchikova I.V. Bimetallic aluminum complexes modified with chloride ions of Mn (II), Fe (III), and Ni (II) for pirocondensate oligomerization // International Research Journal of Pure and Applied Chemistry, 2013, vol. 3, No 4, pp. 428-440.
10. Konstantinov E.K., Mullabayev K.A., Churakova S.K. Razrabotka metodami chislennogo modelirovaniya tekhnologii kompleksnoy pererabotki zhidkikh produktov piroliza // Bashkirskiy khimicheskiy zhurnal, 2019, t. 26, No 2, s. 133-138.
11. Dumskiy Yu.V. Neftepolimernye smoly. – M.: Khimiya, 1988, 168 s. ISBN 5-7245-0057-4.
