Published September 2023, Pg. 30-34

Section: Oil and gas preparing and transportation

UOT: 622.276.6

DOI: 10.37474/0365-8554/ 2023-09-30-34

About the method of calculation of strength and durability of steel technological pipelines of high pressure

A.R. Nagizade - OGPİ “Oil&gas”

The article provides information on the methodology for calculating the strength and stability of a pipeline operating under conditions of high pressures and temperatures, taking into account the working pressure. According to the steel grade, the wall thickness of the selected linear section element was determined based on the initially specified resistances. Also, using modern software, a constructive model of the pipeline was built and its strength resistance from the action of specified loads was calculated. According to the results of the analysis, the suitability or unsuitability of the pipeline can be determined.

References:

1. Mirzayev O.H. Neft-gaz meden avadanliglarinin tekhniki diagnostikasinin esaslary. – Baki, 2012, 155 s.

2. SP34-116-97. Instruktsiya po proyektirovaniyu, stroitel´stvu i rekonstruktsii promyslovykh neftegazoprovodov, Moskva, 1998, 141 s.

3. RF 51-31323949-42-99. Po otsenke rabotosposobnosti defektnykh uchastkov gasoprovodov, Moskva, 1998, 39 s.

4. Metodicheskie ukazaniya k raschyotu na prochnost´ tekhnologicheskikh stal´nykh truboprovodov na РN do 10 MPa, Severodonetsk, 2009, 112 s.

5. SNiP II-45-75. Magistral´nye truboprovody, Moskva, 1975, 71 s.

6. GOST 8731-74. Truby stal´nye besshovnye goryachedeformirovannye. Tekhnicheskie trebovaniya, Moskva, 1976, 10 s.

7. SNiP2.05.06-85. Magistral´nye truboprovody. Moskva, 20122, 99 s.

8. Flare Details for Petroleum petrochemical and Natural Gas Industries. API. American Petroleum Institute, 2020.

9. ASME Code for Pressure Piping, B31. Process Piping. The American Society of Mechanical Engineers, 2016,
pp. 129-130.

10. Stress Concentration Factors of Longitudinal and Transverse Plain Dents on Steel Pipelines. OMAE 2008-57836, pp. 3-6.